粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
研究論文
M型フェライトとスピネルフェライトを用いた異方性W型フェライトの合成
宇都野 正史佐藤 岳金子 裕治
著者情報
ジャーナル オープンアクセス

2015 年 62 巻 12 号 p. 575-579

詳細
抄録
Synthesis of W-type ferrite compounds without atmosphere controlling was investigated focus on the starting materials. W-type ferrite was hard to synthesize without oxygen controlling because W-type ferrite phase exists only at high temperature above 1390 °C at atmospheric pressure due to the existence of Fe2+ and Fe3+ simultaneously. Our new concept is to use M-type ferrite and Spinel ferrite as starting materials because Spinel ferrite contains bivalent and trivalent 3d metal ions. As results, W-type ferrite was simply obtained by calcining in air through the inter-diffusion between M-type ferrite and Spinel ferrite. The anisotropic W-type ferrite compounds were also obtained by aligning the c-axes of the M-type ferrite grains. We concluded that the synthesis using M-type ferrite and Spinel ferrite as starting materials is effective to generate W-type ferrite independent of kinds of bivalent 3d metal ions without oxygen controlling.
著者関連情報
© 2015一般社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top