粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
T22: Other PM Materials
Development of Evaporation-driven Energy Harvesting Device Applying Electrospun Nanofiber Mat with Carbon Black Powders
Yongbum KwonDai Bui-VinhSeung-Hwan LeeSo Hyun BaekJeungjai YunHyun-Woo LeeHandol LeeDa-Woon Jeong
著者情報
ジャーナル オープンアクセス

2025 年 72 巻 Supplement 号 p. S1601-S1604

詳細
抄録

There have been urgent needs to develop advanced technologies for sustainable energy systems due to the rapid development of global society. Evaporation-driven energy generation system is emerging renewable energy technology motivated from the natural phenomenon in the plants’ stomata i.e., water evaporation from root to leaf. This research has attempted to develop novel evaporation-driven energy harvesting device based on the electrospun nanofiber with carbon black powders. Notably, carbon block powder plays important roles to increase the hydrophilic properties, higher level of porosity as well as conductivity of the generation device. These characteristics could finally support to accelerate the generation output as well as the vapor permeability of the elecrtospun nanofiber mat. The result of this research highlighted that applying carbon black powders to the electrospun nanofiber mat (20.0×40.0×0.9 mm3) brought the maximum voltage and current of ~ 0.21 V and ~ 0.12 mA, respectively.

著者関連情報
© 2025 by Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top