粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
メカニカルアロイングによるPdとSiとの混合粉末からのPd珪化物の生成
大場 紀昭近藤 英樹荒川 剛
著者情報
ジャーナル オープンアクセス

1995 年 42 巻 2 号 p. 233-236

詳細
抄録
Crystalline powders of Pd and Si or Zr in the composition ratio varying from Pd:Si (Zr) = 1:2 to 2:1 were mechanically alloyed by a laboratory ball mill in an inert atomosphere. The formation of Pd silicides (Pd2 Si and PdSi) have been recognized at the beginning of milling. On the other hand, in the Pd-Zr system amorphous alloys were obtained as well as the other many systems. Definite exothermic crystallization peak was not measured by differential thermal analysis (DTA) in the temperature range from 298 to 1073K. This result shows that the crystallization enthalpy of amorphous Pd-Zr alloy powders is very small.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top