粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
アーク溶解法によるSiC-B4C共晶セラミックス硬さと微細組織
後藤 孝伊藤 永二平井 敏雄
著者情報
ジャーナル オープンアクセス

1995 年 42 巻 4 号 p. 469-473

詳細
抄録
Quasi binary SiC-B4C and ternary Si-B-C system composites were prepared by arc melting in argon atmosphere. The Vickers microhardness (100g load) of the quasi binary SiC-B4C composites decreased from 39 to 34 GPa with increasing SiC molar content (mSiC) from 25 to 65 mol%. The hardness values at mSiC=45 to 55 mol%, which is nearly the eutectic composition, was higher than those calculated from a linear law. This could be caused by fine lamella microstructures. Free C and free Si co-precipitated at the C-rich and Si-rich side of the quasi binary composition, respectively. The hardness values at the quasi binary compositions were greater than those of the C-rich and Si-rich compositions.
著者関連情報
© 社団法人粉体粉末冶金協会

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top