粉体および粉末冶金
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Evaluation on Accuracy of the Rheological Data of PIM Feedstocks
Byung Ohk RheeSang-hoon Lee
著者情報
ジャーナル オープンアクセス

1999 年 46 巻 8 号 p. 830-836

詳細
抄録
The rheological characterization with capillary rheometer requires three major corrections named as the Rabinowitsch, Bagley and Mooney corrections. Due to the amount of time and effort needed to complete the correction procedure, some engineers may avoid the corrections. However, engineers who want to avoid it should understand how much the theological data is affected by influencing factors. In this article, the correction values made by the Rabinowitsch and Bagley corrections were analyzed for PIM feedstocks in terms of particle shape and size, powder concentration, binder composition, temperature, shear rate and capillary length. Two types of SUS powders with irregular and round particle shapes and a zirconia powder were used with wax-based binders. As results, particle shape and size were the major influencing factor followed by powder concentration. Also a longer capillary is recommended for less error as long as it does not cause thixotropic phenomenon. Without extensive experiment, a feasible result could be obtained only by the Rabinowitsch correction for feedstocks with round particle shape at a relatively low powder concentration. However, the correction is strongly recommended for feedstocks with irregular particle shape at a relatively high powder concentration.
著者関連情報
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top