抄録
This paper deals with heat transfer in a fluid, with uniformly distributed internal heat source, flowing upwards through a vertical tube. Measurements were made of the temperature distribution in both laminar and turbulent flow, and both with and without heat transfer at wall. Heat generation within the fluid was brought about by passing an electrical current through the working fluid, which was an aqueous solution of sodium chloride. The experi-mental results were compared with analytical calculations.
Free convection, which occurs and is superimposed on the movement by forced convection, flattens the fluid temperature distribution in laminar flow through thermally insulated vertical tube. In turbulent flow with heat transfer to wall, the temperature distribution near the wall is affected considerably by the outgoing heat flux.
