Abstract
To develop an efficient and fluorine-free solubilizer for a water/supercritical CO2 microemulsion (W/CO2 μE), in this study, a highly methyl-branched alkyl, isostearyl group was focused on as a CO2-philic tail, and the custom-made isostearyl surfactant, sodium 2-(4,4-dimethylpentan-2-yl)-5,7,7-trimethyloctyl sulfate (SIS1) was synthesized. The surface tension (γ) of an aqueous SIS1 solution was measured at ambient pressure as a function of surfactant concentration, and it was found to be 25 mN/m at concentrations of > 1.5 mM. A low γ value can generally be reached only by a fluorocarbon surfactant, which implies that SIS1 has an excellent solubilizing power for the W/CO2 μE, similar to some fluorocarbon surfactants reported previously. Visual observations of the SIS1/W/CO2 mixtures revealed the formation of transparent single phases without separated water, identified as W/CO2 μE. The μE was well-stabilized at pressures > 210 bar and temperatures > 55 °C. At 75 °C and 370 bar, SIS1 was found by spectral measurements using a water-soluble UV-light absorber to solubilize water contents up to a maximum water-to-surfactant molar ratio (W0) = 50. The achievement of W0 = 50 in a W/CO2 μE system has not been reported previously in similar hydrocarbon surfactant/W/CO2 systems, and this demonstrates that a highly methyl-branched alkyl group can act as a good CO2-philic group for a W/CO2 -type surfactant.
