Fabrication of titanium restoration by means of calcium aluminate-bonded magnesia investment material and one-chamber arc casting apparatus

抄録

Cast titanium restoration for molars has high biocompatibility and is covered by the Japanese national health insurance. Titanium casting requires specific investment material and casting apparatus. A cast restoration for the mandibular left second molar was fabricated using titanium in this study. A wax pattern fabricated on a definitive cast was invested in calcium aluminate-bonded magnesia investment material. Titanium was cast using an argon gas pressure one-chamber casting apparatus. No defects were observed on the surface and the hole was clearly reproduced. A smooth surface on the restoration was obtained by polishing at low speed. Reproductivity and polishing properties of the titanium restoration fabricated in this study were comparable to those of conventional dental metal restorations.