抄録
Authors previously reported that magnetic data obtained by using Eddy current method and AC
magnetization method showed correlation with the increase of susceptibility of the irradiation assisted
stress corrosion cracking (IASCC) on neutron irradiated austenitic stainless alloy specimens. To discuss
the mechanism of the correlation, microstructure observation was conducted on the irradiated specimen,
and magnetic permalloy phase (FeNi3) formation along grain boundary was revealed in this work. From this result, the radiation induced magnetic phase formation along grain boundary seems to be a factor of
the magnetic property change of the irradiated materials, and related to the correlation between magnetic
data and IASCC susceptibility. In addition, sensor probe development was conducted in this work to
obtain higher sensitivity and resolution. It was applied for magnetic measurement on type304 stainless
steel irradiated up to different doses. In this case, magnetic ferrite phase was existed in the type304
stainless steel sample before irradiation therefore it was concerned that magnetic measurement on the
irradiated ones would be disturbed by the magnetic signal from the pre-existing ferrite phase. In the
magnetic measurements, increase of the magnetic data was clearly seen on the irradiated specimens. Thus,
it was thought that the developed magnetic measurement technics can be applied for the irradiated
austenite stainless steels which contain certain quantity of ferrite phase before irradiation.
