1976 年 19 巻 127 号 p. 8-14
In this report, the phenomenon of torsional stress wave propagation in a conical bar is investigated based on the dynamic theory of elasticity. And the following results are obtained. At the wave front, the shear stress distribution has the same form as that of the torque applied, and the amplitude of the stress is inversely proportional to the distance between the apex and the observed point. The torque is transported only with the fundumental wave of which the shear stress distribution has sinusoidal form. Some time after the front passes away, it is permitted to replace approximately the transverse shear stress by that of the fundamental wave, however, complicated the stress distribution of the applied torque may be. As the apex angle becomes small, the degree of approximation becomes good.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials