JSME International Journal Series B Fluids and Thermal Engineering
Online ISSN : 1347-5371
Print ISSN : 1340-8054
ISSN-L : 1340-8054
PAPERS
Critical Power in 7-Rod Tight Lattice Bundle
Wei LIUMasatoshi KURETAHajime AKIMOTO
著者情報
ジャーナル フリー

2004 年 47 巻 2 号 p. 299-305

詳細
抄録
The Reduced-Moderation Water Reactor (RMWR) has recently becomes of great concern. The RMWR is expected to promote the effective utilization of uranium recourse. The RMWR is based on water-cooled reactor technology, with achieved under lower core water volume and water flow rate. In comparison with the current light water reactors whose water-to-fuel volume ratio is about 2-3, in the RMWR, this value is reduced to less than 0.5. Thereby, there is a need to research its cooling characteristics. Experimental research on critical power in tight lattice bundle that simulates the RMWR has been carried out in Japan Atomic Energy Research Institute (JAERI). The bundle consists one center rod and six peripheral rods. The 7 rods are arranged on a 14.3mm equilateral triangular pitch. Each rod is 13mm in outside diameter. An axial 12-step power distribution is employed to simulate the complicate heating condition in RMWR. Experiments are carried out under G=100-1400kg/m2s, Pex=2-8.5MPa. Effects of mass velocity, inlet temperature, pressure, radial peaking factor and axial peaking factor on critical power and critical quality are discussed. Compared with axial uniform heating condition, the axial non-uniform heating condition causes an obvious decrease in critical quality. Arai correlation, which is the only correlation that has been optimized for tight lattice condition, is verified with the present experimental data. The correlation is found to be able to give reasonable prediction only around RMWR nominal operating condition.
著者関連情報
© 2004 by The Japan Society of Mechanical Engineers
前の記事 次の記事
feedback
Top