Dynamics & Design Conference
Online ISSN : 2424-2993
セッションID: 232
会議情報

DCモータと電気回路を用いた台車型免震台の低固有振動数化の研究
*平山 恵太山田 啓介
著者情報
会議録・要旨集 認証あり

詳細
抄録

This paper describes natural frequency reduction of a seismic isolator table using the negative viscous damping and negative Coulomb friction. Noo et al. proposed the seismic isolator table using a DC motor and electrical circuit. The natural frequency and the damping ratio of the isolator can be tuned using the electrical circuit. In addition, the resonance is suppressed by the vibration absorber using an LRC circuit. The problem of the deflection and buckling of a spring was solved by this method; however, the natural frequency of the isolator could not be reduced sufficiently because a viscous damping and Coulomb friction were not negligible. Therefore, we proposed a new electrical circuit that cancels the viscous damping and Coulomb friction in this research. The effectiveness of the proposed method was verified through the simulations and experiments.

著者関連情報
© 2018 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top