Dynamics & Design Conference
Online ISSN : 2424-2993
セッションID: 129
会議情報

Ground structure based topology最適化による最適設計と評価
*茅野 皓輝本田 真也片桐 一彰佐々木 克彦武田 量
著者情報
会議録・要旨集 認証あり

詳細
抄録

The aim of this study is to design an optimum CFRP lattice structure for application to a morphing wing. The ground structure based topology method is adopted as the optimization method, and the results are validated by experiments. In this study, to confirm the effectiveness of the optimization method, a simple hook shape was optimized and its stiffness and strength was compared by tensile tests. A 3D printer capable of laminating thermoplastic CFRP was used to fabricate the specimen. The results of tensile tests showed that the optimized specimens exhibited higher stiffness and strength than the reference model, confirming the effectiveness of the proposed method.

著者関連情報
© 2021 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top