設計工学・システム部門講演会講演論文集
Online ISSN : 2424-3078
セッションID: 1109
会議情報
エアーポケット簡易計算手法の開発(設計支援手法・CAD/RP-III)
高田 公義小森谷 徹
著者情報
会議録・要旨集 フリー

詳細
抄録
When parts with a complicated shape are dipped into coating liquid, the air may be trapped inside. We call this phenomenon an air-pocket. The most popular method to predict the air-pocket is a 2 phases flow analysis of coating liquid and air. However, it takes much time to calculate by this method. Therefore, the feed back to designers is delayed. Our technique is the method that produces bubble particles from the parts surface and traces these bubble particles. As a result of calculation with a simple geometric model, the effectiveness of our technique was confirmed. This paper will describe the examination results of our technique.
著者関連情報
© 2004 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top