Proceedings of the International Conference on Power Engineering : ICOPE
Online ISSN : 2424-2942
セッションID: ICOPE-15-1114
会議情報
ICOPE-15-1114 Heat Transfer Measurement of Rotating Disk Surface Using Transient Technique with Infrared Thermometer
Tatsuro UCHIDAFumio OOTOMOAsako INOMATA
著者情報
会議録・要旨集 フリー

詳細
抄録
Recently, the transient technique using infrared thermometer has widely been used for measuring the distribution of local heat transfer coefficient. In this study, To obtain high-precision measurement of the rotating disk surface temperature field, we have proposed a phase-locked method. The effects of two parameters, on the heat transfer phenomena the rotational Reynolds number Re_<r0> from 0 to 1.8×10^6 and the penetration flow Reynolds number Re_s from 2×10^4 to 7×10^4, were observed. These dimensionless parameter is possible to reproduce the range of actual and the same order. Non-dimensional disk casing gap-to-radius ratio (s/2r_0) fixed 0.026. The present results showed that as the rotational Reynolds number increases, nusselt number tends to 2×10^3 to 3×10^3 increase at test condision.
著者関連情報
© 2015 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top