抄録
In this paper, the retraction grinding method, in which the grinding wheel head gets rapidly back by very small amount immediately after the beginning of spark-out state, is proposed for improving the taper error in the deep hole oscillation internal grinding. Main conclusions obtained are as follows : (1) It is made clear that by the retraction grinding method the taper error of workpiece can remarkably be improved with the fine surface roughness condition. (2) In the retraction grinding the taper generation mechanism is affected just by extending of spark-out grinding time due to a decrease of the residual stock on the stiffness of the grinding wheel and workpiece spindles. (3) By taking into account the periodic change of the normal grinding force linking to the oscillation movement, the measured taper can sufficiently be predicted.
