抄録
A guide for the thermal design of micro and nano satellites is proposed in order to complete the thermal design of micro and nano satellites for about 1 year. Two concepts of thermal design are considered to keep the temperature change of components within the design temperature range of components. One concept is to decrease the temperature change using the whole heat storage of the micro and nano satellite. The other is to decrease the temperature change of the inner structure where the components with the narrow design temperature range are mounted. The temperature of micro and nano satellites designed in the former concept is calculated using one-nodal analysis method. The temperature of micro and nano satellites designed in the latter concept is calculated using twonodal analysis method. The combinations of optical properties on structures and components to keep the temperature within the design temperature range of components are clarified using one- or two-nodal analysis. Then, the multinodal analyses are carried out to be designed in detail based on the optical properties clarified from the one-nodal analysis and two-nodal analysis. This guide of thermal design is applied to Hodoyoshi-1 satellite. Hodoyoshi-1 satellite is the micro satellite that is about 50 cm in width, 50 cm in depth, 50 cm in height, is about 50 kg in mass, has two inner plates, has solar cells on the body, flies on the sun-synchronous orbit of the 500 km of altitude and is pointing to the Earth. The thermal design of Hodoyoshi-1 satellite has been completed for about ten months. The validity of this procedure is confirmed and the problems of this procedure are clarified.
