年次大会
Online ISSN : 2424-2667
ISSN-L : 2424-2667
セッションID: S13207
会議情報

画像による工作機械の振動解析
黄 浩辰*河野 大輔*豊浦 正広
著者情報
会議録・要旨集 認証あり

詳細
抄録

The final goal of this study is to develop a vision-based measurement method of machine tool vibrations. In this paper, a measurement method of the vibration is proposed. In the proposed method, the displacement of the marker attached on the object is obtained through a video captured using a high-speed camera. To obtain the marker displacement, the center position of the marker is identified by fitting a quadratic function to the intensity distribution of the marker. Experiments were conducted to investigate the measurement resolution of the proposed method. The vibration displacement of a cantilever with various amplitude was measured using the proposed method. The measured displacement was analyzed in the frequency domain. The experiment result showed that the vibration with more than 3.4 μm amplitude could be detected.

著者関連情報
© 2020 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top