年次大会講演論文集
Online ISSN : 2433-1325
セッションID: 2713
会議情報
2713 水溶液腐食に伴なう金属材料の水濡れ性の変化と原因(G04-1 機械材料・材料加工(1),G04 機械材料・材料加工)
向井 弘治王 栄光鈴村 文寛木戸 光夫佐竹 優
著者情報
会議録・要旨集 フリー

詳細
抄録
The impedance response under the polarization was measured, and the difference of passive state according to the density under the NaF solution of pure titanium and its alloy was examined from the change in the tracks variously. In addition, the relation to water wettability was considered. The third semicircle that took part directly in the formation of the film both of the impedance tracks of pure titanium and its alloy was seen. Both of the diameter 0.1% in the density is larger than 2.0%, and passive state film on the surface is thicker. In general, it is not easy to get wet from the result of water wettability measurement after the former report is soaked for water by both NaF densities low. It seems that there are some relations from these between the film thickness and water wettability.
著者関連情報
© 2007 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top