生産加工・工作機械部門講演会 : 生産と加工に関する学術講演会
Online ISSN : 2424-3094
セッションID: B09
会議情報
B09 PCD工具によるチタン合金の高速加工(OS3 工具・ツーリング(2))
大田 倫子沖田 淳也角谷 均村上 大介戸田 直大
著者情報
会議録・要旨集 フリー

詳細
抄録
When cutting titanium alloy, the temperature of a cutting tool edge is easy to rise and the tool edge is tend to be worn away quickly because the titanium alloy has the characteristics of low thermal conductivity and high chemical activity. Therefore, it is difficult to achieve a balance between the productivity and the tool life in cutting the titanium alloy, namely, low-speed cutting must be carried out at present. To examine the possibility of the improvement in the cutting efficiency, a PCD (polycrystalline diamond) tool having high thermal conductivity was adopted to the cutting of titanium alloy and its cutting performance was investigated. The PCD tool was found to have excellent flank wear resistance compared with conventional cemented carbide tools. It was also revealed that unprecedented high speed cutting become possible by use of PCD tool with an application of high pressure coolant.
著者関連情報
© 2010 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top