機械材料・材料加工技術講演会講演論文集
Online ISSN : 2424-287X
セッションID: 611
会議情報
611 メカニカルアロイング法で作製したAl-Ni,Al-Mg系金属間化合物とその機械的性質(OS 粉末加工)
大口 綾子結城 務士湯浅 栄二
著者情報
会議録・要旨集 フリー

詳細
抄録
Powder mixtures of Al/Ni and Al/Mg-Al alloy were mechanically alloyed for various milling times. In the Al-25 and 40mol%Ni powder mechanically alloyed for over 18ks, AlNi(β') phase was formed. The crystalline size of AlNi(β') phase decreases with increase of the milling time, and it become to about 30 nm. When the Mg alloy (AZ31) powder mixture with various Al contents was mechanically alloyed, Mg_<17>Al_<12> phase forms for the milling time of ks. The Al-40mass%Ni powder mechally alloyed for 180ks was hot pressed at 823K by 400〜600MPa, and the compact was compressive test under various conditions. When the compact was deformed at 973〜1123K for strain rate of 0.1〜1.0s^<-1>, enhanced ductility appears.
著者関連情報
© 2001 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top