動力・エネルギー技術の最前線講演論文集 : シンポジウム
Online ISSN : 2424-2950
セッションID: D112
会議情報
D112 3次元接続二段エルボ下流に生成する非対称旋回流のオリフィス下流配管減肉への影響(OS6 保全・設備診断技術(2))
久保 達也江原 真司橋爪 秀利
著者情報
会議録・要旨集 フリー

詳細
抄録

Flow visualization experiment and accelerated pipe wall thinning experiment were conducted by applying a swirling flow generated by a piping configuration, three-dimensionally connected dual elbow, to the inlet flow condition of a pipe orifice to investigate pipe wall thinning downstream of an orifice appearing due to the combination of swirling flow and orifice The flow downstream of the orifice was curved by the action of the swirling flow, and the channel wall where the flow turned off toward underwent a large amount of wall thinning Profiles of turbulent quantities, such as turbulent kinetic energy and Reynolds shear stress, were compared to those of amount of pipe wall thinning It was found that the profiles of Reynolds shear stress showed good agreement with those of pipe wall thinning in the case for a large amount of that However, relatively small amount of pipe wall thinning, any profile related to fluid motion could not explain the profiles of pipe wall thinning

著者関連情報
© 2013 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top