ロボティクス・メカトロニクス講演会講演概要集
Online ISSN : 2424-3124
セッションID: 2P2-A03
会議情報
2P2-A03 環境の形状計測に基づく高速クローラロボットの速度制御(サーチ&レスキューロボット・メカトロニクス)
鈴木 志穂子大野 和則田所 諭
著者情報
会議録・要旨集 フリー

詳細
抄録
Our research group has developed a tracked mobile robot "kenaf' for high-speed exploration of the confined space such as the underground cities. The kenaf can move about 3 km/h and can get over about 40 cm step. However, it is difficult to pass through the steps and the narrow spaces quickly by remote control. The authors propose an autonomous speed adjustment system based on measurement of environmental shapes. The system limits the maximum speed of the robot when the obstacles are detected within the kinematics-based ellipsoidal areas. The system also limits the speed when the environmental shape ahead is the steps or the slope. The distances of the obstacles were measured by using the laser range sensor. The environmental shape ahead was obtained by using the range image sensor. The validity of the system was experimentally evaluated in a narrow space and a step.
著者関連情報
© 2008 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top