熱工学コンファレンス講演論文集
Online ISSN : 2424-290X
セッションID: I225
会議情報
I225 多孔質の機能を活用した液体メタノールからの水素のパッシブ生成(一般講演(10))
辻 文雄田中 美香子森 昌司奥山 邦人
著者情報
会議録・要旨集 フリー

詳細
抄録
A novel type of simple reactor for hydrogen production from liquid methanol is proposed. The reactor consists of a small porous ceramic block that has a hole penetrating the center around which a platinum catalyst is supported. After impregnated the porous block with a sufficient amount of liquid methanol, the block is intensively heated by a wire coil heater set up in contact with the hole surface. Methanol is catalytically decomposed into hydrogen and carbon monoxide in the dried region of the block that forms in the proximity of the contacting wire, and then flows out into the hole. Liquid methanol is passively replenished from the outer surface of the block due to capillary suction and is preheated during flow toward the hole. The gas production rate increases significantly with the increase in the heating power and the resulting gas temperature.
著者関連情報
© 2011 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top