集合組織の測定とその応用

武智 弘

doi:10.2472/jsms.21.1037

Texture Measurements and their Application to Engineering Problems

H. Takechi

Author information

JOURNAL FREE ACCESS

1972 Volume 21 Issue 230 Pages 1037-1042

DOI https://doi.org/10.2472/jsms.21.1037

Details

Published: November 15, 1972 Received: - Available on J-STAGE: June 03, 2009 Accepted: October 14, 1972 Advance online publication: - Revised: -
Correction information
Date of correction: June 03, 2009 Reason for correction: - Correction: TITLE Details: Wrong : LECTURE
Right : Texture Measurements and their Application to Engineering Problems

Date of correction: June 03, 2009 Reason for correction: - Correction: AUTHOR Details: Right : H. Takechi¹⁾

Date of correction: June 03, 2009 Reason for correction: - Correction: AFFILIATION Details: [in Japanese]

Date of correction: June 03, 2009 Reason for correction: - Correction: CITATION Details: Right : Barrett, C. S., and T. B. Massalski “Structure of Metals”, Mc Graw-Hill (1966).
Wassermann, G., “Texturen Metallischer Werkstoffe,” Sprimger, Berlin, 1939.
Underwood, F. A., “Texture in Metal Sheets” Macdonald, London, 1961.
1) Lopata, S. L., and E. B. Kula, Trans. TMS-AIME, 224, Aug. 865 (1962).
2) Mieran, E. S., Rev. Sci. Instr., 33-3, 319 (1962).
3) Wever, F., and H. Bötticher, Arch. Eisenhüttenw., 34-3, 205 (1963).
4) Jetter, L. K, C. J. Mchargue, and R. O. Williams, J. Appl. Phys., 27, 368 (1956).
7) Bunge, H. J., Mber. Dt. Akad. Wiss, 1, 27, 400 (1956).
8) Bunge, H. J., Z. Metallkde, 51, 535 (1960).
9) Roe, R. J., J. Appl. Phys, 36-6, 2024 (1965).
10) Roe, R. J., J. Appl. Phys, 37-5, 2069 (1966).
11) Bunge, H. J., Z. Metallkde, 56-6, 378 (1965).
12) Bunge, H. J., Z. Metallkde, 56-12, 872 (1965).
13) Bunge, H. J., Mber, Dt. Akad. Wiss, 7-516, 351 (1965).
14) Bunge, H. J., Mber, Dt. Akad. Wiss, 8-4, 241 (1966).
15) Williams, R. O., Trans. TMS-AIME, 242-1, 105 (1968).
16) Honda, K., and S. Kaya, Sci. Rep. Tohoku Imp. Vniv., 15, 721 (1926).
17) Goss, N. P., U. S. Pat 1, 965, 559 (1932).
18) Lankford, W. T., S. C. Snyder, and T. A. Bausher, AIME, 42, 1197 (1950).
19) Burns, R. S., and R. H. Heyer, Sheet Metal Ind., 35, 261 (1965).
22) Taylor, G. I., J. Inst. Metals, 62, 307 (1938).
23) Hosford, W. F., and W. A. Backofen, 9th Sagamore Ordnance Materials Research Conferenee Deformation Process (1962).

Corresponding author

Correction information

Register with J-STAGE for free!