材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
β'単相Cu-41.7%Zn合金におけるα相の母相に対する優先方位
池野 進, 青木 勝, 松田 健二, 上谷 保裕, 多々 静夫
著者情報
ジャーナル フリー

1992 年 41 巻 460 号 p. 11-16

詳細
抄録
The characteristic form of α phase, which always exists as a pair of plates when produced by decomposition of the matrix of β' phase, was examined by using an embossing method and SEM observation. A prominent feature of the α phase was utilized to determine the habit plane of α phase to the matrix plane. A straight line appeared at the center of the triangular α phase as one of the feature, and this center line was almost parallel to the (002) band of SEM-ECP from the β' matrix. At the (001) plane of β' matrix, there are two kinds of α phase that could be divided by the inclination angle to the (011) band of SEM-ECP, and they were separated away by an angle of about 4° each other. At the (011) plane of β' matrix, each plate of α phase pair was inclined about 7.3° from the (011) band of SEM-ECP from the β' matrix. From the results mentioned above, it is concluded that the habit plane of α phase to β' matrix exists near {5, 27, 29}m plane of the matrix.
著者関連情報
© 日本材料学会

この記事はクリエイティブ・コモンズ [表示 - 非営利 - 改変禁止 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top