材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
タングステン合金切欠き材のき裂発生強度
小林 訓武藤 睦治細貝 寧長
著者情報
ジャーナル フリー

1999 年 48 巻 7 号 p. 758-762

詳細
抄録
Fracture strength and fracture behavior of sintered two-phase tungsten alloy specimens with various notch root radii were investigated. Cracks mainly initiated by interface decohesion between tungsten particles at the notch root. Cleavage fracture of tungsten particle was observed for the material with higher volume fraction of ductile matrix phase. No significant variation of crack initiation strength was found for notch root radii larger than 5mm. However, crack initiation strength significantly decreased with reducing notch root radii for the radii smaller than 5mm. The non-linear notch mechanics proposed by Nisitani et al has been successfully applied to the present materials.
著者関連情報
© 日本材料学会
前の記事 次の記事
feedback
Top