日本機械学會論文集
Online ISSN : 2185-9485
Print ISSN : 0029-0270
ISSN-L : 0029-0270
輪軸負荷の一測定例
小西 正一中村 宏
著者情報
ジャーナル フリー

1959 年 25 巻 151 号 p. 221-227

詳細
抄録

An experimental test of the loads on the wheel passing a curved track, -lateral, vertical, and longitudinal loads, -was carried out for the new B-B-B diesel electric locomotive of type DF 50. The results are as follows. 1) Lateral load : For the leading axle, the lateral loads act from outside towards center of the wheelset for both wheels. As for the inside wheel, the load is nearly independent of the curvature of track, while, for the outer one, it increases as the radius of curve diminishes, attainings a max. value of 5.6 tons (Lateral load/Vertical 1oad=0.7) for 200m. radius. On the other hand, for the trailing axle, the loads are very small with indefinite directions of action. 2) Vertical load : The vertical loads generally agree with the theoretical values, calculated considering centrifugal force. 3) Longitudinal load : While the longitudinal load has been hitherto rarely treated theoretically, considerable loads were revealed, attaining a max. value of 1.9 tons. The direction of loads is forward for the outer wheel of the leading axle and the inside wheel of the trailing one, and backward for the remainder.

著者関連情報
© 社団法人日本機械学会
前の記事 次の記事
feedback
Top