1995 年 61 巻 581 号 p. 245-250
An enhancement technique was developed for natural convection heat transfer from a vertical finned plate. The horizontal plates attached on the finned plate at equal spacing were utilized to promote heat transfer. These horizontal plates redirect the high-temperature fluid flow from the vicinity of the base plate to the outside of the boundary layer, and promote the low-temperature, incoming flow from the far wall region toward the base plate. The overall and local heat-transfer coefficients of thus-treated plates were measured and compared to those of the non-treated, finned plate. It is found that the overall and local heat-transfer coefficients were increased by 20% and 40%, respectively, when the horizontal plates with appropriate height and pitch were used.