Improving the Signal Intensity of Cryosections Using a Conductive Adhesive Film in Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Imaging

抄録

The matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) technique was used to obtain the molecular images of cryosections without labeling. Although MALDI-MSI has been widely used to detect small molecules from biological tissues, issues remain due to the technical process of cryosectioning and limited mass spectrometry parameters. The use of a conductive adhesive film is a unique method to obtain high-quality sections from cutting tissue, such as bone, muscle, adipose tissue, and whole body of mice or fish, and we have reported the utilization of the film for MALDI-MSI in previous. However, some signal of the small molecules using the conductive adhesive films was still lower than on the indium tin oxide (ITO) glass slide. Here, the sample preparation and analytical conditions for MALDI-MSI using an advanced conductive adhesive film were optimized to obtain strong signals from whole mice heads. The effects of tissue thickness and laser ionization power on signal intensity were verified using MALDI-MSI. The phospholipid signal intensity was measured for samples with three tissue thicknesses (5, 10, and 20 μm); compared to the signals from the samples on the ITO glass slides, the signals with conductive adhesive films exhibited significantly higher intensities when a laser with a higher range of power was used to ionize the small molecules. Thus, the technique using the advanced conductive adhesive film showed an improvement in MALDI-MSI analysis.