MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Analysis of Yield Rate in Single Crystal Casting Process Using an Engineering Simulation Model
Hisao EsakaManabu TamuraKei Shinozuka
著者情報
ジャーナル フリー

2003 年 44 巻 5 号 p. 829-835

詳細
抄録
A 2-D engineering model for grain selection has been developed taking the columnar dendrite growth theory into consideration. After evaluating this model via a unidirectional solidification experiment, the single-crystal casting process was simulated. Since the time required for calculation is rather short, a statistical analysis has been performed for the first time. The yield rate of well-oriented single crystal is increased by increasing the initial number of grains on the chill plate. However, the yield rate does not exceed approximately 90%. A detailed investigation of the formation mechanism of misorientation has revealed two possible processes (Type A and Type B) that may occur during single crystal casting process.
著者関連情報
© 2003 The Japan Institute of Metals and Materials
前の記事 次の記事
feedback
Top