MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Sn–Cu Alloy Electrodeposition and Its Connecting Reliability for Automotive Connectors
Hiroaki NakanoSatoshi OueDaisuke YoshiharaHisaaki FukushimaYoshifumi SakaShigeru SawadaYasuhiro Hattori
Author information
JOURNAL FREE ACCESS

2011 Volume 52 Issue 6 Pages 1237-1243

Details
Abstract

The electrodeposition behavior of Sn–Cu alloys in a sulfate solution containing three additives, cresol sulfonic acid, benzal acetone, and nonionic alkyl polyethylene glycol ether surfactant, was investigated potentiostatically between +0.3 and −0.7 V vs. NHE at 298 K. The contact resistance of the alloys deposited on a Cu connector was evaluated. Cu in the alloys behaved as a more noble metal than did Sn, thus showing the typical feature of regular-type codeposition. In solutions containing additives, the difference in deposition potential between Cu and Sn decreased because Cu deposition was significantly suppressed by the additives. The alloys deposited in solutions containing additives exhibited smooth surfaces and were composed of Cu, Sn, Cu6Sn5, and Cu3Sn phases in accordance with the equilibrium phase diagram of a binary Cu–Sn system. The contact resistance of the alloys increased by heating at 433 K, thus indicating that connecting reliability did not improve by plating with the stable metallic compound Cu6Sn5. The connecting reliability of a connector after abrasion was higher in deposited alloy films than in Sn reflow plating.

Content from these authors
© 2011 The Japan Institute of Metals and Materials
Previous article Next article
feedback
Top