Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Relationship between Microstructures and Mechanical Properties in Ti–4.5Al–2Mo–1.6V–0.5Fe–0.3Si–0.03C for Next-Generation Aircraft Applications
Toshikazu AkahoriMitsuo NiinomiMasaaki NakaiHarumi TsutsumiShiro AkiYoshio ItsumiShogo MurakamiHideto Oyama
Author information

2013 Volume 54 Issue 5 Pages 783-790


The effects of various heat treatments on the microstructure and mechanical properties of an (α + β)-type titanium alloy, Ti–4.5Al–2Mo–1.6V–0.5Fe–0.3Si–0.03C (KS Ti-9), were investigated systematically for possible use in next-generation aircraft applications.
The as-received KS Ti-9 shows strong anisotropy of mechanical strength derived from the intense texture (T-texture) of the primary α phase. This anisotropy continues to be observed in KS Ti-9 annealed at a temperature below β transus followed by air cooling, but the anisotropy drastically decreases in KS Ti-9 when subjected to a duplex heat treatment, that is, when the as-received material of KS Ti-9 is sequentially heated to a temperature slightly below β transus followed by water quenching and then annealed followed by air cooling. It is considered that the reduction in the anisotropy in KS Ti-9 subjected to this duplex heat treatment is associated with the difference in the orientation of the precipitated acicular α phase.

Information related to the author
© 2013 The Japan Institute of Light Metals
Previous article Next article