Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Solution Process for Synthesizing Bioactive Nano-Mesh Layer on Ti-Based Bulk Metallic Glasses
Yuriko FukushimaKen-ichi KatsumataZhu ShengliXie GuoqiangMitsuo NiinomiKiyoshi OkadaNobuhiro Matsushita
Author information

2013 Volume 54 Issue 8 Pages 1343-1346


Ti based Bulk Metallic Glasses (BMGs) were treated by Hydrothermal (H), Electrochemical (E) and Hydrothermal-Electrochemical (H-E) processes in NaOH solution and all of these processes enabled fabrication of titanate nano-mesh structures on their surfaces. XPS data suggested that the amount of cytotoxic Cu was drastically decreased for the samples treated by H-E process. Specimens having nano-mesh structures on their surface were immersed in Simulated Body Fluid (SBF) for 12 days. The results of the SBF test supported the fact that nano-mesh structures fabricated by these three methods have bioactivity. However, only the specimen treated by H-E process exhibited very good adhesion performance between the induced hydroxyapatite layer and substrate with intermediated titanate nanomesh layer. These results indicated that the H-E process was the best among three to fabricate a low cytotoxic bioactive nano-mesh layer on Ti-based BMG which enabled to induce hydroxyapatite layer with strong adhesion.

Information related to the author
© 2013 The Japan Institute of Metals and Materials
Previous article Next article