Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Effect of Grain Boundary Segregation of Interstitial Elements on Hall–Petch Coefficient in Steels
Setsuo TakakiDaichi AkamaNobuo NakadaToshihiro Tsuchiyama
Author information

2014 Volume 55 Issue 1 Pages 28-34


The yielding behavior of interstitial-free steels and low-carbon steels with varying amounts of C and N were investigated in connection with the Hall–Petch relation. The Hall–Petch coefficient is as small as 150 MPa·µm1/2 in interstitial-free steels but it increases to 600 MPa·µm1/2 by adding solute carbon up to 60 ppm. Nitrogen does not have a significant effect on the Hall–Petch coefficient. The results of three-dimensional (3D) atom probe analysis indicated that carbon has 3–4 times greater segregation potential in comparison with nitrogen. The small effect of nitrogen on the Hall–Petch coefficient in steel is probably due to the small segregation potential of nitrogen. It was also confirmed that discontinuous yielding occurs when the difference between the yield stress and friction stress is increased by grain-refinement strengthening and that yielding occurs by dislocation emission from grain boundaries where primary dislocations have piled up. Carbon atoms segregated at grain boundaries seem to play a role in stabilizing dislocation emission sites at the grain boundaries, which enhances the Hall–Petch coefficient of iron. These results support the dislocation pile-up model of explaining yielding in polycrystalline metals.

Information related to the author
© 2013 The Japan Institute of Metals and Materials
Previous article Next article