Article ID: MT-M2023054
An as-cast Mg–6Zn–0.9Zr–0.9Nd (mass%) alloy was isothermally heat treated to form semi-solid microstructure, and its corrosion behaviors before and after heat treatment were revealed. During the isothermal heat treatment, the microstructure transformed into homogenous spheroidized structure, and the liquid phase presented network-shaped morphology. The electrochemical results showed that there is no passivation behavior and obvious local corrosion in the semi-solid formed alloy, and homogeneous general corrosion is the primary corrosion form. The network-shaped liquid phase prevented the flow of corrosion media between solid phases, and therefore inhibited the formation of pitting corrosion.
