2021 Volume 8 Issue 3 Pages 20-00526
Aiming at the problem of dislocation at the junction of metro carriages, a three DOF (degree of freedom) coupled vibration model of the junction of metro carriages was established. Then, the kinetic equation of vibration model was established by Lagrange method, the transfer function of the vibration model was deduced by Laplace transform, and the control system of vibration model was established by SIMULINK. In addition, the excitation signals such as the traction force, resistance force, lateral force and longitudinal force at wheel and rail were studied. Through simulation, obtain the coupling vibration characteristics under different parameters including traction force, spring stiffness and damping coefficient. The simulation results show that the amplitude differences ( x1 － x2 / y1 － y2 / z1 － z2 and x5 － x6 / y5 － y6 / z5 － z6 ) (Fig.2) at the junction of TC1-MP1 and MP2-TC2 (Fig.1) are more larger than other junctions. When the traction force is from 254 to 384kN, the larger the traction force, the larger the amplitude difference. When the parameters are: kx ≥ 3.5×107 N/m, ky ≥ 1.7×105 N/m, kz ≥ 2.75×105 N/m, cx ≥ 4×105 Ns/m, cy ≥ 1×105 Ns/m, cz1 ≥ 3×104 Ns/m， the dislocation is small.