抄録
Novel birefringent single-mode fibers are fabricated with a vacant hole on either side of the central elliptical core, referred to as side-hole fiber, and their intrinsic and tension-induced modal birefringences are measured to know their characteristic properties for the purpose of making a strain sensor. Five sampled side-hole fibers are prepared for measurements. The sensitivity of the strain sensor is primarily determined by two parameters, tension-induced and intrinsic modal birefringences. Tension-induced modal birefringence is controllable by optimal arrangement of the size and location of the side-holes in the cross-section of the fiber. A sensitivity diagram for designating and fabricating side-hole fibers is presented.
