抄録
Dynamic characterization of thermal shock fracture behavior in toughened ceramics was conducted. In this study, a disk specimen with 49mm diameter of TZP (Tetragonal Zirconia Polycrystal) was used. After a pre-crack was introduced into the specimen, thermal shock was imposed on the specimen. In this study, the new thermal shock experimental method (Disk-on-Rod method) was developed, in which the disk specimen was heated to high temperature and quenched by contacting with the cool metal rod. During thermal shock, the transient temperature on the disk specimen was measured by IR camera and thermal stress was calculated by FEM. For characterizing the fracture process, AE signals were detected using an AE sensor attached on the bottom of the metal rod. Since the significant crack deflections were observed during tests, the high thermal shock fracture resistance of TZP was suggested. Consequently, the contribution of the stress-induced martensitic transformation of TZP was demonstrated.