日本セラミックス協会 年会・秋季シンポジウム 講演予稿集
16th Fall Meeting of The Ceramic Society of Japan & The 5th International Meeting of Pacific Rim Ceramic Societies(PacRim5)
セッションID: 04-O-04
会議情報

Thermal Shock Testing on Mullite/ Molybdenium FGM Plates with Infrared Radiation/Water Flow Technique
*Gang JIN, Makoto TAKEUCHI, Sawao HONDA, Tadahiro NISIKAWA, Hideo AWAJI
著者情報
会議録・要旨集 フリー

詳細
抄録
Multilayered mullite/Mo FGM disks with different compositional gradient were fabricated using a powder stacking method and a pulse electric current sintering technique. Thermal shock tests on the fabricated specimens were carried out with newly developed infrared radiation/water flow technique. By using this apparatus, stable and ideal temperature distribution through specimens, which is similar to the modeling temperature distribution, was obtained. The thermal stress distribution in FGM plates under thermal shock was analyzed and the residual thermal stress introduced from fabrication process was also evaluated. It is observed that the thermal shock resistance of FGMs increases with increase in layered numbers or by increasing the volume fraction of metal in FGMs. It is also shown that the thermal shock resistance was greatly influenced by the residual thermal stress on the ceramic surface.
著者関連情報
© The Ceramic Society of Japan 2003
前の記事 次の記事
feedback
Top