抄録
For the detailed analysis of a canopy structure, e.g., solar radiation envrionment, it is necessary to obtain spatial data related to the leaf position in a canopy. We approximated a leaflet shape into an ellipsoid because, if it is possible, necessary data for determining the spatial position of each leaflet can be obtained by using the manipulator technique, which is used to measure a certain point in space accurately. The coincidence of a soybean leaflet area, which was measured using an area meter, and an ellipsoid area, which was obtained by approximating the maximum width and maximum length of a leaflet to the short axis and long axis of an ellipsoid, respectively, was ascertained in five cultivars of the soybean plant. Then, for a soybean population, the spatial factors of each leaflet were measured with a manipulator, i.e., the spatial position of each leaflet was determined at four points (in three-dimensional spaces) two for the maximum width and two for the maximum length of a leaflet. These data were used for the computer simulation of the canopy structure including the leaf area density in each layer with inclination angles of leaflets and the sunlit area.
