1998 年 6 巻 6 号 p. 40-46
A Grinding is a method to form a shape by rotating a wheel rubbing against the object. Dressing for the grinding wheel is consisted of two processes : truing and sharpening. When super-abrasive wheels are used, it is very difficult to form in the truing process. In order to improve the process, our laboratory has developed called SF (Side Face) dressing process. It is to use a vertical rotary dresser travelling across the diamond wheel with the same speed condition. This paper reports the improvement of truing efficiently through the analysis of SN ratio. As the ideal function, it was considered that the wear of the diamond wheel is larger-the-better and the wear of the dresser is smaller-the-better. The total of these two SN ratio was used for the analysis. As the result, the improved compared with current condition was estimated as 13.72 db and confirmed as 12.66 db.