溶接学会論文集
Print ISSN : 0288-4771
A6N01アルミニウム合金とAZ31マグネシウム合金の摩擦攪拌接合におけるプロセス因子とその影響
渥美 健太郎藤井 英俊森貞 好昭石川 武河田 直樹
著者情報
ジャーナル フリー

36 巻 (2018) 1 号 p. 9-15

詳細
PDFをダウンロード (2361K) 発行機関連絡先
抄録

Friction stir welding (FSW) is a solid phase process which can produce high quality dissimilar joints. However, due to the difference of material properties between A6N01 aluminum alloy and AZ31 magnesium alloy, optimization of process parameter is difficult for dissimilar FSW. In this study, the relationship between process factors (material arrangement, tool offset and probe diameter) and quality of the joint was investigated. After the optimization of these process factors, the AZ31 and A6N01 dissimilar joints with high joint efficiency could be obtained at circumferential velocity of the probe from 0.147 to 0.183m/s regardless of probe diameter. This result indicates that the circumferential velocity is one of the most important factors for AZ31 and A6N01 dissimilar FSW.

著者関連情報
© 2018 社団法人 溶接学会
前の記事 次の記事

閲覧履歴
後続誌

溶接学会誌

feedback
Top