溶接学会論文集
Print ISSN : 0288-4771
溶接部抵抗検出による接合面積の計測とモニタリング法の有効性
溶接部電圧・抵抗によるアプセット溶接品質のモニタリング法(第2報)
仲田 周次加柴 良裕
著者情報
ジャーナル フリー

1986 年 4 巻 4 号 p. 662-666

詳細
抄録

The sectional area at weld interface of upset welds at final period of welding has been found to be measured in real time by both weld resistance and effective time-integral value of weld voltage for low carbon steel rod.
The current path area is related to weld resistance, current path length, and average resistivity, which is a function of material composition and average temperature at welds, based on Ohm's law. It is clarified that average resistivity at welds can be determined from effective time-integral value of weld voltage. So the sectional area at weld intrefacecan be measured by both weld resistance and effective time-integral value of weld voltage and this method can be adopted as one of monitoring parameter for estimating the welding quality of low carbon steel rod.
According to the results, effective time-integral value of weld voltage and weld resistance are shown to be fundamental monitoring parameters of upset welds with prepared edge. Furthermore, this monitoring system is shown to be effective in assurance of upset weld quailty with no relation to weld condition, edge angle and so on, for low carbon steel rod.

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top