金属表面技術
Online ISSN : 1884-3395
Print ISSN : 0026-0614
ISSN-L : 0026-0614
溶融亜鉛めっき処理条件が高張力鋼の引張り特性に及ぼす影響
圧延表面にめっき皮膜をもつ矩形断面の試験片を用いた場合
千葉 和茂加藤 博嵯峨 卓郎
著者情報
ジャーナル フリー

1988 年 39 巻 11 号 p. 746-750

詳細
抄録
Experiments were carried out in accordance with a design of experiment and the following results were obtained.
(1) For rolled structural steel for welding of low (58-73kgf/mm2) and midium (41-52kgf/mm2) strength, yield point and elongation were not affected by the galvanizing conditions.
Tensile strength was affected by the cooling method, but the tensile strength of both galvanized steels were higher than that of the non-galvanized steel, and no adverse effects occured.
All tensile properties of the galvanized steels indicated higher or equivalent values in comparison with the non-galvanized steel.
(2) For high strength low alloy structural steel with a grade of 80kgf/mm2, yield point and tensile strength were not affected by the galvanizing conditions.
Elongation was affected by pretreatment conditions. The elongation of steel galvanized after blasting was less than that of steel galvanized after acid pickling, but no significant effect was attributable to whether a galvanized coating was applied or not.
著者関連情報
© (社)表面技術協会
前の記事 次の記事
feedback
Top