2017 Volume 58 Issue 4 Pages 195-200
An LC-MS/MS method for the determination of diniconazole in agricultural products, livestock and marine products was developed. Diniconazole in agricultural products was extracted with acetone. The extract was concentrated and partitioned with n-hexane and 10% sodium chloride solution. Agricultural products such as grains and beans were defatted using n-hexane–acetonitrile. Livestock and marine products were extracted with a mixture of acetone and n-hexane, and the organic layer was evaporated to dryness. The residue was defatted using n-hexane–acetonitrile. Cleanup was carried out using a Florisil cartridge column and a graphitized carbon cartridge column for these samples. The LC separation was carried out on an Inertsil ODS-3 column with a linear gradient of 0.1% formic acid and acetonitrile containing 0.1% formic acid. MS was carried out in the positive ion electrospray ionization mode. The calibration curve was linear between 0.00125 to 0.00750 mg/L. Average recoveries (n=5) of diniconazole from 16 kinds of agricultural products, livestock and marine products fortified at the MRLs (0.01 ppm) were 88.3–108%, and the relative standard deviations were 0.5–5.1%. The limits of quantitation were 0.01 mg/kg.
