Glass beads were coated in a vibro-fluidized bed by atomizing a fine silica powder and polyvinyl alcohol solution. The coating efficiency and weight fraction of the agglomerated particles were measured under various experimental conditions, and their dependencies on the amplitude and frequency of vibration were investigated. When the humidity of outlet gas was high, the high coating efficiency and the agglomeration of core particles were observed. The efficiency of the powder coating decreased as the amplitude and the frequency increased, while agglomeration was prevented by the addition of vibration. It was confirmed that coating with high quality and high efficiency, where few agglomerates were produced and silica powder was utilized efficiently, was possible using the vibro-fluidized bed with adequate amplitude and frequency.
