鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
特殊鋳鋼の摩耗特性について
吉岡 正三山本 久稲数 直次
著者情報
ジャーナル オープンアクセス

1968 年 54 巻 4 号 p. 501-506

詳細
抄録
The wear tests on several kinds of special cast steels, “Adamite” cast steel s and a “Ductile” cast iron were carried out, using a Nishihara's wear testing machine, the load being 20Kg, and the revolution slip 9.09% in the absence of lubricant.
The wear resistivities of the normalized cast steels containing 0.56-0.91% carbon increased with increases in both the hardness and the carbon content of the steel. In these cases, it was found that for the lower carbon steel, adhesive were firstly occured and followed by oxidation wear, while only oxidation wear for the higher carbon steel.
“Adamite” cast steels containing 1.46-2.26% carbon were mainly worn by abrasive wear, which resulted in less superior wear resistivities than those of the lower carbon cast steels. There was a contrary tendency such that their total wear loss increased with increases in the hardness and carbon content.
A “Ductile” cast iron (3.38%C) was found to have a far superior property than the others, owing to the protective lubrication of free graphite contained within itself.
著者関連情報
© 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top