鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
カルシウムカーバイド回転円柱による溶銑の脱硫速度の研究
大井 浩小口 征男南 参
著者情報
ジャーナル オープンアクセス

1970 年 56 巻 8 号 p. 991-997

詳細
抄録
The desulphurization velocity of molten iron saturated with carbon by rotating calcium carbide cylinder has been investigated in temperature from 1250° to 1450°C.
Results obtained are as follows:
1) The mass transfer coefficient for the desulphurization reaction may be written by the following equation,
JD=k/U (SC) 0.28=0.038 (Re) -0.49
which is quite similar to the mass transfer coefficients for the dissolution of rotating benzoic acid cylinder into the water.
2) The activation energy for the desulphurization reaction obtained from this experiments was 13.4±7.4 kcal/mol. This agrees well with 6.5-18.4 kcal/mol calculated from the equation of mass transfer coefficient using activation energies of sulphur diffusion and viscosity of molten iron saturated with carbon.
著者関連情報
© 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top