固体石灰のスラグ中への溶解速度

抄録

The rate of dissolution of CaO into liquid slag was determined by measuring the decrease of diameter of rotating CaO cylinder dipped in CaO-SiO₂-Al₂O₃ or FeO-CaO-SiO₂ slag and the penetration of slag was examined. Also, the distribution of components in liquid slag adjacent to the solid-liquid interface was examined by the XMA technique.
The rate of dissolution increased with temperature and with rotating speed of the cylinder and was expressed by the rate equation derived from the assumption that the rate was controlled by mass transport in the boundary layer of liquid slag.
The dissolution rate into liquid slag containing FeO was several times greater than that into slag without FeO, bacause of the difference of physical properties of slag and, probably, of the difference of the mode of 2CaO. SiO₂ formation.
Slag components penetrated into solid CaO were mainly Al₂O₃ and FeO and the SiO₂ content was very little. This may be explained by the formation of Al₂O₃ or FeO rich slag layer between solid GaO and 2CaO. SiO₂ film.